Best Routers for Ziply Fiber: 2026 Buying Guide

A single eero 7 unit is rated to cover up to 2,000 sq ft, roughly a 25-foot radius, with wireless speeds up to 1.8 Gbps over Wi-Fi 7. Two auto-sensing 2.5 GbE ports support wired connections and internet plans up to 2.5 Gbps.

• Up to 2,000 sq ft coverage per unit
• Wireless speeds up to 1.8 Gbps
• Two 2.5 GbE auto-sensing ports

Multi-link operation (MLO), a Wi-Fi 7 feature, lets compatible devices connect across multiple bands at once for more stable throughput during high-demand tasks.

Setup runs through the eero app, guiding the router through network naming, password creation, and initial configuration without requiring a separate desktop client. A single eero 7 can act as the main gateway, replacing an existing router directly.

• App-guided setup process
• Can act as a standalone gateway or extend an existing eero network
• Backward compatible with all previous eero hardware generations

Because backward compatibility carries across generations, an existing eero mesh network can add this unit as a node without replacing units already installed.

The router's 2.5 GbE WAN port supports internet plans up to 2.5 Gbps, above the 1 Gbps ceiling that standard router ports impose, making it suited to fiber or cable plans rated for multi-gig speeds.

• 2.5 GbE WAN support for plans up to 2.5 Gbps
• Supports 120+ simultaneously connected devices
• Compatible with eero Built-in on select Amazon Echo devices

Households on internet plans below 1 Gbps will not see the full benefit of the 2.5 Gbps WAN capability, though the router still operates normally at lower plan speeds.

Bandwidth splits into up to 1200 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz, which is where the AX1800 label comes from. Those are link speeds shared across connected devices, not a guaranteed per-device figure.

• 5 GHz carries the fast traffic - 4K streaming, gaming, large downloads - over shorter distances.
• 2.4 GHz travels further through walls and is where most smart plugs, cameras and sensors live.
• Four high-gain antennas plus beamforming aim signal at devices rather than radiating evenly.

OFDMA lets the router talk to several devices within the same transmission slot, which is the practical Wi-Fi 6 gain in a busy household: fewer stalls when a dozen devices all want airtime at once.

Initial setup runs through a phone app that walks through connection type, network name and password, so no browser configuration page is needed to get online.

• Parental controls allow per-profile time limits and content filtering.
• Guest networks can be raised on both bands to keep visitors off the main network.
• Quality-of-service settings prioritise a chosen device, useful when one machine handles video calls.

The router can also act as an OpenVPN or PPTP server, letting a laptop away from home reach the home network. It joins an EasyMesh setup with compatible units, so coverage can be extended later without replacing it. Note that the more advanced security and parental control features move to a paid tier once the included trial ends.

Wiring is conventional: a gigabit WAN port for the modem and four gigabit LAN ports for wired devices such as a desktop, console, NAS or television.

• Every port is gigabit, so a plan above 1 Gbps cannot be delivered in full through this router.
• Plans up to about 940 Mbps are matched comfortably.
• A modem or ONT from the internet service is still needed - this is a router, not a combined unit.

It works with the major cable, fibre and DSL services in the same way any standalone router does, since the connection type is set in software during setup. If the existing service supplies a combined modem-router, that unit usually has to be switched to bridge mode before this one takes over routing.

Five gigabit Ethernet ports are split as one fixed WAN, two that can be configured as either WAN or LAN, and two fixed LAN. Running two or three WAN connections at once allows load balancing across separate lines, or automatic failover when the primary line drops.

• A USB port accepts a 4G or 3G modem as a further backup uplink.
• Bandwidth control and session limits stop one machine flooding the connection.
• Input accepts 100 to 240 V, so it works on either mains standard.

There is no wireless radio in this box at all. It is a gateway, and Wi-Fi has to come from separate access points cabled to the LAN side. Five ports also means a switch is needed for anything beyond a handful of wired devices at the site.

Tunnel capacity is what separates this from a home router: up to 20 LAN-to-LAN IPsec tunnels, plus 16 each of OpenVPN, L2TP and PPTP connections. That is enough to link several branch sites and still leave headroom for remote workers dialling in.

• An SPI firewall with DoS defence handles the standard flood and malformed packet attacks.
• Filtering by IP, MAC and URL, together with access control lists, sets who can reach what.
• Application layer gateway support covers FTP, H.323, PPTP, SIP and IPsec pass-through for VoIP and legacy software.

One caveat to plan around: OpenVPN configuration requires an Omada SDN controller rather than being available from the standalone interface. IPsec, L2TP and PPTP can be set up without one, so pick the tunnel type according to how you intend to manage the device.

The gateway can run standalone through its own web interface, or be adopted into the Omada software-defined networking platform alongside access points and switches. Adoption gives one dashboard for the whole site instead of logging into each device separately.

• Three controller choices: a hardware controller appliance, software running on a PC or server, or a cloud-based controller.
• Cloud access allows configuration and monitoring from outside the site.
• One-click automatic IPsec setup between Omada sites removes most of the manual tunnel configuration.

For a single-site installation the standalone interface is enough on its own. For anyone managing several locations, or handing a network over to someone else to support, the controller model is the main reason to choose this gateway over a consumer router, since configuration and firmware can be pushed centrally.

This is a 2x2 dual-band 802.11ax unit: roughly 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, radiated from four external antennas.

• 1024-QAM packs more data into each transmission than 256-QAM Wi-Fi 5 gear
• OFDMA splits one channel between several small transmissions instead of queueing them
• MU-MIMO serves two streams at once to capable clients
• Target Wake Time lets phones and sensors sleep between check-ins

The practical gain over an older AC1750 unit is not headline speed to a single laptop, it is behaviour when fifteen devices are awake. OFDMA cuts the airtime each small packet consumes, so a video call holds steady while a console downloads. Coverage depends heavily on wall construction: plasterboard and timber are kind, dense masonry is not.

The router app walks through the first boot: plug the WAN port into your modem, scan the label, name the network and set an admin password.

• Trend Micro powered filtering blocks known malicious sites with no ongoing fee
• Parental controls schedule access per device
• Built-in VPN server covering WireGuard and OpenVPN protocols
• Instant Guard builds an encrypted tunnel home from a laptop abroad

Change two settings straight away. Turn on automatic firmware updates, since router security depends on them, and give the 2.4 GHz and 5 GHz bands the same network name so devices roam between them without manual selection. If you later add a second compatible unit, AiMesh pairing is handled from the same app in a few taps.

The unit is a router, not a modem, so it connects to whatever your provider supplies.

• Works behind cable, fibre ONT, DSL and satellite terminals with an Ethernet handoff
• One gigabit WAN plus four gigabit LAN ports
• Power input 110 to 240 V, output 12 V at 1.5 A maximum
• PPPoE, dynamic and static WAN modes all supported

If your provider supplies a combined modem-router, put that box into bridge or modem mode first, because leaving two routers in series creates double NAT and breaks console networking and port forwarding. There is no USB socket, so shared storage needs its own network connection. For lines up to about 900 Mbps the gigabit WAN is the correct match; anything faster wants multi-gig hardware.

A single unit is specified to cover roughly 2,500 sq ft, which in practice means a typical two-storey home with the unit placed centrally and high rather than in a ground-floor corner.

• AX3000 breaks down as 2402 Mbps on 5 GHz (2x2 with HE160 channel width) and 574 Mbps on 2.4 GHz.
• Wi-Fi 6 brings OFDMA and MU-MIMO, which matter most when many devices are awake at once — support is quoted for over 150 connections.
• Real throughput to any one client sits below the radio figures, and HE160 needs a client that supports 160 MHz channels to approach the headline number.
• Adding a second unit extends coverage under one network name, with devices handed between units as you move.

Thick masonry walls, a converted loft or a detached garage all argue for two units rather than expecting one to reach.

Setup runs through the Deco app rather than a browser page. You connect the unit to the modem with Ethernet, power it up and follow the guided steps on a phone.

• The app handles naming the network, setting the password and checking the internet link, and takes about ten minutes for a first unit.
• Three Gigabit Ethernet ports sit on each unit and any one can act as the WAN input, so you are not tied to a fixed socket.
• Wired Ethernet backhaul is supported: run Cat 5e or better between units and the mesh link stops consuming wireless airtime.
• HomeShield adds network security features and parental controls from inside the same app.

Keep the app installed afterwards. Firmware updates, device lists and guest network toggles all live there rather than on a local web page.

This replaces your router, not your modem. Most connections still need the provider modem or ONT in front of it, with the Deco taking an Ethernet feed from that box.

• If your provider supplied a combined modem-router, switch it to bridge or modem mode before adding this unit, or you end up with two layers of network address translation.
• Ports are Gigabit, so a plan faster than 1 Gbps is limited by the wired interface no matter what the radios can do.
• It joins the same mesh as other Deco models, so an existing X20 or similar can stay in service alongside it.
• The manufacturer lists a two-year warranty and 24/7 technical support for most home products.

There is no USB socket, so network storage or a shared printer needs a computer or a separate NAS.

The Archer BE230 is a dual-band BE3600-class Wi-Fi 7 router with combined speeds up to 2882 Mbps on 5GHz and 688 Mbps on 2.4GHz, using 4-stream Multi-Link Operation to keep connections stable as devices roam between bands. Four internal antennas with beamforming push signal toward hard-to-reach corners, with coverage figures up to 2,000 sq. ft. and support for up to 60 connected devices at once.

• Combined throughput up to 2882 Mbps (5GHz) and 688 Mbps (2.4GHz)
• 4-stream Multi-Link Operation for Wi-Fi 7 devices
• Coverage figures up to 2,000 sq. ft. for up to 60 devices
• 4K-QAM modulation for added data capacity per stream

Because this is a dual-band model, it skips the 6GHz band found on tri-band Wi-Fi 7 routers, which matters most in dense apartment buildings with heavy 5GHz interference from neighboring networks.

Physical connectivity runs through one 2.5G WAN/LAN switchable port, a second dedicated 2.5 Gbps LAN port, and three additional 1 Gbps LAN ports, so multi-gig internet plans and wired devices are not bottlenecked by a single gigabit port the way many entry-tier routers are. A USB 3.0 port adds local file sharing or printer connectivity without extra hardware.

• One 2.5G WAN/LAN switchable port plus a second 2.5 Gbps LAN port
• Three additional 1 Gbps LAN ports
• USB 3.0 port for shared storage or printers
• EasyMesh support to add extenders or additional routers later

The 2.0GHz quad-core processor is built to manage this port and antenna load without introducing lag, and EasyMesh compatibility means the network can grow into a mesh system later instead of requiring a full router swap.

The Archer BE230 works with any cable or fiber internet service since it is a standalone router rather than a modem-router combo, so it slots in behind whatever modem your provider supplies. It includes built-in VPN client and server support alongside HomeShield network security tools and Private IoT network separation for keeping smart home devices off the main network.

• Works with any standard cable or fiber modem, ISP-agnostic
• Built-in VPN client and server functionality
• Private IoT network separates smart home devices from primary devices

Advanced HomeShield features such as extended parental controls and deeper security scanning commonly sit behind an ongoing subscription, so check which protections are included at no extra cost versus which require a paid tier before relying on them.

A single unit covers up to 2,000 square feet, roughly a 25-foot radius, and supports internet plans up to 5 Gbps through two auto-sensing 5 GbE ports. Wireless speeds can reach up to 3.9 Gbps thanks to Wi-Fi 7's multi-link operation (MLO), which lets compatible devices use multiple wireless bands at once for faster, more stable connections.

• Coverage up to 2,000 sq. ft. (25-foot radius) per unit
• Supports internet plans up to 5 Gbps
• Wireless speeds up to 3.9 Gbps with Wi-Fi 7 MLO

The tri-band radio and mesh routing software work together to route traffic through the fastest available path rather than a fixed connection.

A single unit can act as the main gateway, replacing an existing router outright, or be added to an existing mesh network to extend coverage further. Because it's backward compatible with all previous generations, a household already running older mesh hardware can mix in a Pro 7 unit rather than replacing the whole system.

• Works as either a standalone gateway or a mesh extension point
• Backward compatible with all previous eero generations
• Compatible with eero Built-in on select Amazon Echo devices

Background routing software runs continuously to keep connected devices on the strongest signal path as they move around the coverage area.

This router is built to handle 200+ connected devices on a single unit, aimed at homes or small businesses running many smart devices, laptops and phones on the same network at once. New Wi-Fi 7 hardware, including this Pro 7 unit, comes with a three-year warranty.

• Supports 200+ connected devices per unit
• Three-year warranty on new Wi-Fi 7 hardware
• Tri-band Wi-Fi 7 radio for high-density device environments

Reaching the full rated device count and throughput depends on a compatible internet plan and Wi-Fi 7-capable client devices, since older devices will connect at their own maximum supported speed.

The RS200 is a dual-band WiFi 7 router figured in the BE6500 class, reaching combined wireless speeds of up to 6.5Gbps across its bands, a figure the maker positions as roughly 2.4 times faster than a comparable WiFi 6 router. Coverage is specified at up to 2,500 square feet with support for as many as 80 connected devices at once, figures that sit at the entry point of NETGEAR's current WiFi 7 Nighthawk lineup.

Wired connectivity includes a 2.5 Gig internet (WAN) port for multi-gig internet plans, plus 1x 2.5 Gig and 3x 1 Gig LAN ports for wired devices such as a desktop PC, a NAS or a games console needing a stable, high-throughput connection.

• WiFi class: WiFi 7, BE6500 (up to 6.5Gbps)
• Coverage: up to 2,500 sq. ft.
• Device capacity: up to 80
• WAN port: 2.5 Gig

This listing is for the router only; it does not include a built-in cable modem, so a separate modem with coax input is required to connect to a cable internet service, or an ONT for fiber service. It is compatible with any internet service provider, since the router itself just needs a wired connection from a modem into its WAN port.

To reach the router's full 2.5Gbps WAN speed, both the internet plan and the modem feeding it need to support that same 2.5Gbps figure; a standard 1 Gig plan or an older modem will cap throughput at that lower ceiling regardless of the router's own capability. NETGEAR Armor runs in the background once set up, adding automatic monitoring across every device connected to the network.

• Modem: not included, required separately
• WAN speed ceiling depends on modem and ISP plan
• Security: NETGEAR Armor included

This router suits households in roughly a 2,500 square foot home running up to about 80 devices between phones, laptops, smart home gadgets, and streaming devices, wanting a step into WiFi 7 without the coverage of a larger mesh system. Gamers and anyone doing frequent 4K streaming or video conferencing benefit from the added bandwidth WiFi 7 provides across multiple devices at once.

Larger homes beyond 2,500 square feet, or households needing to connect more than 80 devices, are better matched to a higher model in the same Nighthawk WiFi 7 range built for greater coverage and device capacity. Anyone without a modem already in place will need to plan for that as a separate purchase alongside this router.

Three radios rather than two: 2402 Mbps on 6GHz, 2402 Mbps on 5GHz and 574 Mbps on 2.4GHz, making up the 5400 Mbps combined headline. The 6GHz band is the reason to buy a 6E unit at all, because it carries no legacy traffic from older devices and has room for 160MHz channels without overlapping the neighbours.

Six high-gain antennas with beamforming shape signal toward connected devices, and OFDMA plus true tri-band working raises capacity roughly fourfold against a comparable dual-band unit when many devices are active at the same time.

Behind the radios sit a 1.0 GHz dual-core CPU and 512 MB of memory, which is what stops throughput collapsing when dozens of clients, QoS rules and a VPN tunnel are all live at once. The housing is shaped for heat dissipation rather than stacking.

The standout wired feature is the 2.5 Gbps port, which can face either direction. Used as WAN it lets a multi-gig cable or fibre service exceed the old Gigabit ceiling; used as LAN it gives one machine, typically a NAS or a workstation, a 2.5 Gbps link to the rest of the network.

Setup runs through the Tether app, which handles connection type, network naming and firmware. Do the firmware update first, before anything else gets configured.

VPN support is unusually complete for a home unit. It runs as both a server and a client, covering OpenVPN, PPTP and L2TP, so you can either reach your home network from outside or push household traffic out through a provider. Security is WPA3, and the unit carries a 2-year warranty.

It works with any provider that hands off an Ethernet connection, including AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink and Frontier. As with any standalone router, a separate modem is still needed for most cable and DSL services, so this replaces the router half of an existing gateway rather than the whole box.

On the client side, only Wi-Fi 6E devices can use the 6GHz band. Recent flagship phones, current laptops and newer 6E adapters qualify; anything older sits on 5GHz or 2.4GHz and sees no benefit from the third radio at all. Worth knowing too: 6GHz attenuates faster through walls than 5GHz, so the fastest band is also the shortest ranged.

OneMesh support lets a compatible extender join as a single roaming network name rather than appearing as a second SSID.

This is a dual-band AC1200 router: up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz, quoted as 1,200 Mbps combined because the two bands are simply added together.

• Four fixed external antennas with beamforming aim signal at connected devices rather than radiating evenly in all directions
• Coverage is quoted at around 1,000 sq ft, which suits an apartment or a compact single-floor home
• MU-MIMO with two spatial streams lets it serve several devices at once instead of in turn
• 5 GHz handles streaming and gaming, while 2.4 GHz reaches further through walls for doorbells and sensors

For a larger home or thick internal walls, pair it with an EasyMesh extender to form one roaming network rather than a second, separate network name.

Setup runs through the maker's mobile app on Android or iOS, or through a browser page if you prefer a keyboard.

• Connect the WAN port to your existing modem, power up, and follow the prompts
• Set the wireless names and passwords, then let the app check for a firmware update - keeping firmware current is the main ongoing security task
• Guest Wi-Fi is a single toggle and keeps visitors off the main network
• Parental controls block sites by keyword and limit access times per device
• Access Point mode turns it into a wireless bridge behind an existing router, while range extender mode rebroadcasts a network you already have

The unit accepts 100-240 V input, so it travels internationally with nothing more than a plug adapter.

This is a router, not a modem. Cable, DSL and fibre lines each need their own modem or ONT in front of it, which most providers supply as part of the service.

• It speaks standard DHCP, PPPoE and static IP connection types, covering the major providers
• IPv6 is supported, which several providers now hand out by default
• IPTV set-top boxes are handled through IGMP Proxy and Snooping, bridge mode and tagged VLANs where the provider requires them
• WPA3 is available for devices that support it, with WPA2 fallback for older equipment

The limitation to plan around is the wired side: every Ethernet port is 10/100 Mbps. If your line delivers more than roughly 100 Mbps, wired devices will never see it.